Dear Farooq, For NPS kindly apply the note - 2168787, the prequisite for this note is support pack level SAPK-600B1INSAPHRCIN. Once this is done then the NPS calculation will be done automatically by system if you update infotype 0585 with NPS contribution. Hope this helps. Regards, Bhabagrahi
↧
Re: How to Configure NPS?
↧
Re: VAT Adjustment with Discount in Customer Payment
Hi Sagar,
In global parameters for your company code (OBY6), you have two indicators:
- Tax base in net value
- Discount base is net value
These indicators controls the way taxes and discounts are calculated. Depending of the country, you may have to activate none, one or both indicators.
Check if these settings are properly maintained for your company code.
Good luck
Th.
↧
↧
Re: How to Change Working Day as Holiday vice versa
Thanks for your response, i will try it in testing server and get back to you.
↧
BBP items in DFKKMOP/DFKKMOPW
Dear Experts,
I have a question, what decides the BBP slice would be stored in DFKKMOPW table? There are three ways the BBP can be created in the system during Move-in , Periodic/Regularization invoice, or Manually. So, tried to logically align based on this, but in the system its very random why some slices are not in DFKKMOPW. Can someone tell why some slices of BBP are recorded in DFKKMOP and sometimes its not?
Thanks in advance
↧
OWL - Details
Hi experts,
I have an OWL, as shown in the screen shot below. What i want to achieve is, when the "Rate Group" column's (a codelist) value = A, then in the Details PreviewPane, only "Default" and "Default1" tab will be shown; when the "Rate Group" column's value = B, then in the Details PreviewPane, only "Default" and "Default2" tab will be shown.
Any idea?
Thanks.
cheers,
julius
↧
↧
Re: Height row in a crosstab
Hi Jonas,
I think you need to separate the CSS classes.
.sapzencrosstab-HeaderCellDefault .sapzencrosstab-DataArea, .sapzencrosstab-DimensionHeaderArea, .sapzencrosstab-ColumnHeaderArea
{
font-size : 7px;
height : 10px;
}
The declaration above means that the font-size and height will be applied to these CSS classes: .sapzencrosstab-HeaderCellDefault , .sapzencrosstab-DataArea, .sapzencrosstab-DimensionHeaderArea and .sapzencrosstab-ColumnHeaderArea
If you seperate the header classes and the data/cell classes, you will be able to apply different properties. For example:
.sapzencrosstab-HeaderCellDefault .sapzencrosstab-DimensionHeaderArea, .sapzencrosstab-ColumnHeaderArea
{
font-size : 7px;
height : 10px;
}
.sapzencrosstab-DataArea,
{
font-size : 10px;
height : 12px;
}
Regards,
Jean-Guillaume
↧
Re: 999 line items and document splitting
hi
while splitting if entries more than 9999 then it will create split document under gl view using same entry view document. you need to do configuration for this splitting clearing gl. i dont rememenr exactly where this config. i don't have system now..
regards
srinivas
↧
Re: Fiori ERP Application X1 1.0, which addons should i install in frontend and backend?
Hi Masayuki,
We are using embedded Gateway deployment option for Fiori Apps.
What is NW version required to use component UIX01EAP 100?
Our Landscape version SAP NW7.02 SP 12.
Thanks,
Kiran.
↧
Calling a BRF+ Function from Workflow: Amount import parameter
Hi
I have a BRF+ function with a type AMOUNT in the signature as input parameter
I have tried to create a task by including the BRF+ function but I got a problem saying that the AMOUNT was not linked to DDIC
So I changed the link to NETWR.
I generated the task but now I am facing a problem, eventhough in my BRF+ function the type is correct and contain the Amount and currency, in the linkage I only have NETWR so I can not transfer the currency in the binding of the task.
I have checked the task generated container and the type is NETWR.
The generated class is only providing
call method _set_value(
name = 'NETWR'
fdt_name = 'NETWR'
value = NETWR ).
So I don't know how to transfer the amount and currency to the BRF+ directly from a generated task
I could set up a function module calling the BRF+ but I thought the integration should cover this challenge ....
Is there a way to do it that I have missed in the direct generation ?
Cheers
Stephane
↧
↧
UIX01EAP 100 required SAP NW version
↧
Re: Dimension Override Functionality
Hello Vadim,
Thank you very much for you prompt reply. lets consider in this way we have two models Cost centre and another one is profit centre (for understanding purpose)
The Layouts which we built on cost centre with same dimension override functionality its working fine but not in Profit centre model.
we use the same formula, everything is same.
=EPMDimensionOverride("000","COST_CENTER",E3)
E3 refers the above formula.
Thank you very much...
↧
Re: WEBI Report Scheduling Error
Hi Zahid,
I tried with your suggestion.Now i am getting another error as 
Here RFC connection from Source to Destination working fine. Suggest me how to resolve this error.
Thanks
Sravani.N
↧
CX_SY_MOVE_CAST_ERROR occurred
Hi Experts,
I am trying to loda data through DTP to Cube, But i am getting below Error, Please let me know if you have faced similar kind os issue.
@5C@ An exception with the type CX_SY_MOVE_CAST_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause @35@
@5C@ Source type \CLASS=CL_RSODP_BW_REQ_TPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_RSBK_DTP_H @35@
Thanks & Regards,
Chandra.
↧
↧
Re: In
Hello Mukthar,
Thanks for your reply.we have maintained order field is mandatory for that GL and we did not maintain default order because as per our business we can not maintain default order.
I have seen some related threads to maintain invoice block for payment through MRBR once released system will allow for payment .but i did not find fully related concept and configuration.
↧
Re: Re transferring the customer data or material data from GTS to R3
I assume you are asking for From ECC to GTS.
go to transaction /n/sapsll/menu_legalr3 and then Initial transfer of master data
↧
Re: DB2 error: ADM14001C An unexpected and critical error has occurre !!!
Dear Hugo,
Please find the attachment.
Thanks
SANDEEP
↧
Re: Reserve stock for possible future demand
Hi,
What you are looking for is called A-Run in the Fashion industry.
SAP Standard reserve stock only when you create the sales orders and the sales order with the smallest delivery date reserves the stock.
In the Fashion industry, SAP has developped this A-Run functionnality where you can decide at a later point which customers you want to deliver first (because they are big customers).
Unforthunately you need to have the Industry Specific SAP AFS in order to use the A-Run.
In SAP Standard you cannot achieve easily what you describe.
Regards,
Philippe
↧
↧
Re: PO not Printing automatically.
Hi Krishna,
I want to auto Print the PO while release from ME29N. Thank you
↧
What is next for ABAP?
Hello All Experts,
I have serious question regarding the careers in ABAP.
It has been a 3 yrs journey with ABAP for now, can you please guide me on
what next step can be taken towards building a strong career. I also have few
questions regarding the same below:
As an ABAPer what is next for him with reference to HANA?
How an ABAP developer can fit himself into this HANA world? Whats there for
him in HANA such that his ABAP experience is not wasted?
Is doing a SAP HANA course along with certification is good for strong
career growth?
In short what next big step can an ABAPer take now with 3 yrs of ABAP
experience to improve his career?
Kindly provide your valuable inputs on the same.
I would like to mention the same discussion in the below spaces:
Thanks and Regards,
Satish
Message was edited by: Colleen Lee. Removed CCing of other spaces. Please update TAGS if you want your post to appear elsewhere - and only do so if it relevant for the space.
↧
Re: Intercompany stock transfer return
↧